The broncolor FT System is a continuous lighting system, which is simply unbeatable for light output, flexibility and simplicity.

With four Para reflectors available including accessories and a choice of 800 W / 1600 W daylight or 1000 W / 2000 W (120 V /230 V) halogen lamps, the FT-System is as easy to extend as it is to use.

The dimmable ballast unit (100%-50%) for is equipped with an automatic voltage detection circuit rated for 90 V to 265 V 50/60 Hz; it can therefore be operated from a domestic power socket outlet anywhere in the world. The unit offers three different operating modes: “Low Noise” for recording situations with original sound, “Standard” for normal requirements when filming at up to 1000 frames per second, and “High Speed” for filming at up to 2000 frames per second. Even at very high ambient temperatures, the patented temperature control system ensures safe and reliable operation.

Is photography your passion, or is it video that turns you on? With broncolor's new continuous lighting solution, you no longer have to decide, because our Paras paired with halogen or HMI FTs are the right choice for every image. Whether it moves or not.

For very soft and three-dimensional results, move the light rod out of focus. Which removes the flat lighting effect on people and products.

On the other hand, if you focus the light source, the light is practically parallel and concentrates the beam when it leaves the Para, and becomes a very large spot, which because of its size, is never too harsh.

To further control the light coming from the Para a textile honeycomb grids can be mounted on all Paras.

But not only that, with focusing you will always achieve your objective, because you can direct the light precisely on to your motif so that it arrives where you need it. The unique combination of FT light source and Para gives you a very high light output!

In addition the light can be scattered by one of three diffusors of different densities. This makes the dominance of sheen milder and so the light finer, but still "typically Para"!

The apex zone of the 88 HR and 133 HR Paras is made of an especially heat-resistant material tolerant for long periods of time to the very high output 1600FT light source.

With four clamping levers (Para 88 HR and 133 HR) or a crank (Para 177 and 222) the reflectors can be unfolded first, independently of everything else. The focusing rod for that Para is then mounted and the lamp with its back reflector fitted at the front. The other end of the rod takes the lamphead with integral power supply unit – and ... finished!

The broncolor HMI FT1600 is dimmable, provides constant colour at all times, and so is easy to mix with flash and daylight. The light is absolutely flicker-free and thus perfect for high-speed exposures. With a CRI of 95+, the light quality is outstanding.

Halogen light can also be used with the FT System. The FT focusing rod is then fitted with a halogen lamp. The lamphead is then connected directly to the mains without an electronic ballast unit.

The FT rod (for HMI or halogen) can be simply replaced by an F rod for mounting a flash source. And with the right adapter, broncolor lamps and those of many other manufacturers can be mounted in Paras.

With the FT System you are set up for fantastically creative pictures

Should your needs grow, the system is modular and can be expanded as you wish. There is nothing that can come between your ideas and perfect lighting.