Type | Condenser (electret bias) |
Frequency Response | 50 to 16,000 Hz |
Polar Pattern | Cardioid |
Output Impedance | Rated at 150 ohms (100 Ohms actual +/- 20%) Recommended minimum load impedance: 800 ohms |
Sensitivity (at 1,000 Hz) | Open Circuit Voltage: -51 dBV/Pa (2 mV) (1 Pa = 94 dB SPL) |
Clipping Level (at 1,000 Hz) | 1000 Ohm Load at 1,000 Hz: -6 dBV (0.5 V) |
Maximum SPL (at 1,000 Hz) | 139 dB at 1,000 Hz (0.25% THD, 1000 Ohm load) |
Self-Noise | 22 dB typical, A-weighted 24 dB typical, weighted per DIN 45 405 (equivalent sound pressure level; measured with true rms voltmeter) |
Dynamic Range | 117 dB (maximum SPL to A-weighted noise level) |
Hum Sensitivity | -5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz) |
Signal-to-Noise Ratio | 72 dB at 94 dB SPL (IEC 651)* *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted. |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector. |
Power | Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 1.0 to 1.2 mA |
Connector | Three-pin (XLR) professional audio |
Case | Aluminum construction with painted blue metallic finish, and hardened steel grille with nickel satin chrome plating |
Dimensions | See User Guide |
Net Weight | Net: 207 grams (7.6 oz) Packaged: 565 grams (1.24 lbs) |
Environmental Conditions | Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F)(relative humidity <90%) Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity <80%) |